TM 9-2350-277-20-2
REPLACE FUEL CUTOFF CONTROL CABLE ASSEMBLY — Continued
0220 00
3.
Feed fuel cutoff control cable (1) through clamp (2) on engine governor housing (3). Secure with screw (4), two washers
(5), and nut (6). Do not tighten at this time.
4.
Install headless shoulder pin (7) on fuel control arm (8). Install washer (9) on pin and secure with cotter pin (10).
5.
Install one headless collar (11) onto cable (1), and install cable through headless shoulder pin (7). Install second collar
(11) onto cable and tighten both collars with setscrew (12).
6.
Position cable (1) in clamp (2). With cable pulled out, hold fuel control arm (8) in shut off position and tighten screw (4)
and nut (6). Have helper assist.
0220 00-5
