FUEL TANK REPAIR (CONTINUED) - TM-9-2350-267-34

FUEL TANK REPAIR (CONTINUED) - TM-9-2350-267-34_83

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
64

4-20.2 Change 2 TM 9-2350-267-34 FUEL TANK REPAIR (CONTINUED) NOTE To repair holes bigger than 1/2 inch across, do steps A-R. To repair cracks or punctures less than 1/2 inch across (or in length), do steps R-V. A For holes larger than 1/2 inch across at any point, cut away damaged area. Make smooth-edged circular opening. (Sharp angular cuts make repair more difficult.) Scarf crater to at least 1-1/2 inch. Shape sides down to opening. C Blow away dust and clean repair area with dry-cleaning solvent (item 17, Appx B). NOTE Presence of oil in repair area will result in poor adhesion. A 1/8-inch application of regenerated silica (item 5 - Repair Kit) compacted under a warm pad will withdraw oil for improved adhesion. D Measure repair area and estimate material requirement. TA57369

Privacy Statement
Press Release
Contact