14-2
Change 4
TM 9-2350-267-34
Remove pin (10) and pin (11).
F
Remove and discard seal (12). Scrape dirt and adhesive from seal seat.
G Remove hatch (1).
DISASSEMBLY
B
Remove handle (15).
ASSEMBLY
Reverse order of disassembly.
INSTALLATION
A Install new cover seal (12) using adhesive (item 3, Appx B).
B
Coat each torsion bar (7) with grease (item 27, Appx B).
C Install torsion bars with cover at 106-degree, 30-minute angle from closed
position.
D Reverse order of removal.
