ASSEMBLY - TM-9-2350-267-34

APU GEAR CASE: DISASSEMBLY, INSPECTION, REPAIR AND ASSEMBLY (CONTINUED) - TM-9-2350-267-34_285

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
251

12-12 Change 4 TM 9-2350-267-34 APU GEAR CASE: DISASSEMBLY, lNSPECTION, REPAIR AND ASSEMBLY (Continued) ASSEMBLY NOTE Apply adhesive (item 4, Appx B) to all gaskets, screw threads and exposed electrical terminals. Steps A-F apply to both sides of chain housing. A Install bearings (42) in chain housing (23). B Install bearing (40) and new seal (39) in bearing retainer (37). C Install new gasket (38) on bearing retainer (37). D Install sprocket (41) and bearing retainer (37) with bearing (40), new seal (39), and new gasket (38) in chain housing (23). E Aline screw holes in bearing retainer (37) with holes in chain housing (23). F Tap bearing retainer (37) into place with plastic hammer and secure with four screws (36).

Privacy Statement
Press Release
Contact