APU GEAR CASE: DISASSEMBLY, lNSPECTION, REPAIR AND ASSEMBLY (CONTINUED)
N
O
P
R
Remove six nuts (25) and six flat washers (26).
Remove generator (12).
Remove top outlet fittings at swivel elbow (27) from hydraulic pump
(28).
Remove bottom inlet elbow fitting and adapter (29) from hydraulic
pump (28).
Remove two screws (30), two lockwshers (31), and remove hydraulic
pump (28) from pump adapter (32). Remove key (33) from pump
shaft. Discard lockwashers.
12-9
Change 4
TM 9-2350-267-34
