CLEANING - TM-9-2350-267-34

HYDRAULIC BRAKE REPAIR (CONTINUED) - TM-9-2350-267-34_241

HYDRAULIC BRAKE REPAIR (CONTINUED) - TM-9-2350-267-34_243

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
211

11-4 Change 1 HYDRAULIC BRAKE REPAIR (CONTINUED) TM 9-2350-267-34 0 Remove and discard packing (21) and backup ring (22). P Remove and discard packing (23) and backup ring (24). CLEANING WARNING Dry-cleaning solvent (PD-680) is toxic and flam- mable. To prevent personal injury when using PD-680, use only in a well ventilated area. Avoid breathing vapors. If you become dizzy get fresh air immediately and seek medical attention. Avoid contact with eyes, skin and clothing. Use protec- tive goggles, gloves, and clothing. If contact is made, immediately flush with water and seek medical attention. The flashpoint for Type I dry- cleaning solvent is 100°F (38°C); for Type II it is 138°F (50°C). Do not use near open flame or ex- cessive heat. INSPECTION AND REPAIR A Inspect all parts for damage. Replace if necessary. B Check that oil relief plug (25) hole is clear of obstructions. C Remove relief plug (25) and clean hole if necessary. D Lightly coat new relief plug (25) with hydraulic fluid (item 30, Appx B). Insert new plug (25), closed end first, into inner sur- face of power plate (4). Tap plug lightly with flat object until open end of plug is flush with inside surface of plate. Wipe parts dry with clean, lint-free cloth. Clean all parts with dry- cleaning solvent (item 17, Appx B). TA312575

Privacy Statement
Press Release
Contact