HYDRAULIC BRAKE REPAIR (CONTINUED) - TM-9-2350-267-34

HYDRAULIC BRAKE REPAIR (CONTINUED) - TM-9-2350-267-34_243

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
213

11-6 Change 4 TM 9-2350-267-34 HYDRAULIC BRAKE REPAIR (CONTINUED) E F G H I J K Install protective plug (20), new preformed packing (19), socket plug (18) and bleeder screw (16). Install spring retainer (15) into housing (3). Install eight springs (14) and eight springs (13) in spring retainer (15). Install new packing (5) into housing (3). WARNING Rotating disk must be clean and dry before installing. There should be no presence of oil on any lining material or mating surface of stationary disks. Contamination may cause failure. Install new retaining ring (12) on shaft (1l) if removed during disassembly. Install shaft (11), stationary disk (9), rotating disk (8), two springs (7), primary disk (6) and two torque pins (10). Install four bolts (1) and four new lockwashers (2) in housing (3). Thread bolts into power plate (4). Torque bolts evenly to 50-60 lb-ft.

Privacy Statement
Press Release
Contact