FLAME DETECTOR SWITCH

WINTERIZATION KIT, COOLANT HEATER REPAIR (CONTINUED) - TM-9-2350-267-34_235

WINTERIZATION KIT, COOLANT HEATER REPAIR (CONTINUED) - TM-9-2350-267-34_237

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
205

10-6 TM 9-2350-267-34 WINTERIZATION KIT, COOLANT HEATER REPAIR (CONTINUED) WARNING Handle restriction orifice plate with care. Do not drop or force any object through plate openings. The slightest distortion in plate or orifices will in- terfere with proper operation of fuel control valve. If flow rate is not within limits, remove and clean orifice plate. Replace fuel control valve if proper adjustment cannot be obtained. FLAME DETECTOR SWITCH A B C D ADJUSTMENT Back off adjusting screw (1) until detector switch (2) clicks. Turn screw (1) in until switch (2) clicks again. Turn screw (1) in 3/4 inch past click point. Coat screw (1) with varnish (item 52, Appx B). TA309836

Privacy Statement
Press Release
Contact