DISASSEMBLY - TM-9-2350-267-34

VANE AXIAL COOLING FAN ASSEMBLIES REPAIR (CONTINUED

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
91

VANE AXIAL COOLING FAN ASSEMBLIES REPAIR (CONTINUED) DISASSEMBLY A Remove nut (1), key washer (2) and impeller (3) from housing (4). NOTE Do not disassemble or try to repair impeller. It is J’ dynamically balanced and spin teste to 10,000 rpm. If impeller is damaged, replace with iden- tical part number impeller. B Remove 12 socket head screws (5) and 12 flat washers (6). NOTE Retain shims. Use to obtain tolerances during assembly (p 5-25). c Remove fan drive gear box assembly (7) and shim (8). D Remove six screws (9) and retaining plate (10). NOTE Do not discard items unless damaged. E Remove six screws (11) and six lockwashers (12). F Remove gland assembly (13). G Remove six screws (14) and six lockwashers (15). H Remove gear shaft (16) and retaining plate (17). I Remove two bearings (18), shield (19), spacer (20) and bear- ing (21) from gland (22). 5-19 TA309752 TM 9-2350-267-34

Privacy Statement
Press Release
Contact