6-148
Change 1
TM 9-2350-267-20
STE/lCE WIRING HARNESS, DCA TO DRIVERS BULKHEAD (12329996): REMOVAL AND INSTALLATION (CONTINUED)
REMOVAL
I
WARNING
I
Turn MASTER switch OFF. Disconnect battery
ground leads before performing any maintenance.
A Open battery compartment doors.
B Unscrew dust cap (1) from DCA receptacle (2) and let cap hang
by chain.
C Remove DCA receptacle (2) and dust cap (1) from vehicle
bracket by removing four screws (3), four flat washers (4), four
lockwashers (5) and four nuts (6). Discard lockwashers.
D Remove two screws (7) and four lockwashers (8) securing two
groups of three ground leads (9) to vehicle. Discard lockwashers.
E Remove nine screws (10), nine lockwashers (11) and nine retain-
ing straps (12). Discard lockwashers.
F
Disconnect plug (13 from STE/ICE resistor box (14).
G Remove harness support strap (15) by removing one screw (16)
and one lockwasher (17). Discard lockwashers.
H Disconnect plug (18) from bulkhead receptacle (19).
TA312824
