STE/ICE WIRING HARNESS, ENGINE TRANSDUCERS TO ENGINE ELECTRICAL DISCONNECT (12329990): REMOVAL AND INSTALLATION
CONTINUED)
E Disconnect ground lead (13), starter positive terminal AY (14) and starter
solenoid positive terminal AX (15) from engine starter. Reinstall remaining
wires on terminals.
F
Disconnect connector (16) from air box pressure transducer lead (17).
G Remove clamp (18), screw (19) and lockwasber (20). Discard lockwasher.
H Remove harness from engine by removing from five tiedown strops (21).
(Do not remove straps from engine and around other harnesses.)
INSTALLATION
A Install harness to engine by installing five tiedown straps (21).
B
Install clamp (18), screw (19) and new lockwasber (20).
C Connect connector (16) to air box pressure transducer lead (17).
D Connect ground lead (13), starter positive terminal AY (14) and starter
solenoid positive terminal AX (15) to engine starter.
E Connect connector (8) to fuel falter differential pressure switch (9).
6-153
Change 4
TM 9-2350-267-20