CONVEYOR CONTROL SWITCH TO CONVEYOR OVERRIDE SWITCH CABLE ASSEMBLY (12330244): REMOVAL AND INSTALLATION
(CONTINUED)
REMOVAL
INSTALLATION
NOTE
A Install harness (16) to conveyor with 13 straps (15), four nuts (14), 13 flat
washers (13), 13 new lockwashers (12) and 13 screws (11).
Tag wiring harness lead connector location before
removal.
B
Connect connector (9) to 12330252 harness connector (10).
A Remove two screws (1) and two lockwashers (2) and remove conveyor
C Connect ground lead (5) to conveyor pedestal (6) with screw (7) and two
override switch (3). Discard lockwashers.
new lockwashers (8).
B
Disconnect harness connectors (4) from conveyor override switch (3).
D
Connect harness connectors (4) to conveyor override switch (3).
C Disconnect ground lead (5) from conveyor pedestal (6) by removing screw
E
Install conveyor override switch (3) with two screws (1) and two new
(7) and two lockwashers (8). Discard lockwashers.
lockwashers (2).
D Disconnect connector (9) from 12330252 harness connector (10).
E Remove 13 screws (11), 13 lockwashers (12), 13 flat washers (13), four
nuts (14) and 13 straps (15) that secure harness (16) to conveyor. Discard
lockwashers.
F
Remove harness (16) from conveyor.
6-121
Change 4
TM 9-2350-267-20