6-18
Change 2
TM 9-2350-267-20
AERATION DETECTOR: REMOVAL AND INSTALLATION
Equipment Condition:
Radiator fan protectors installed (p 2-5).
Coolant drained (TM 9-2350-267-10).
General Safety Instructions:
A protective fan screen must be installed prior to doing maintenance
in the engine compartment when engine is running or when running
engine in ground hop mode. Contact with rotating fan can cause
injury.
REMOVAL
WARNING
Make sure engine and coolant are sufficiently
cooled before disconnecting hoses. Removal of
hoses while engine and coolant are hot will cause
coolant to spurt from hoses under pressure and
will cause severe burns.
A Disconnect two electrical connectors, wires 352A and 352B (1).
B
Remove screw (2), flat washer (3) and ground wire (4).
C Unscrew and loosen hose clamps (5).
D Remove two hoses (6).
Plug hoses from radiator and main tube.
E
Remove four screws and four lockwashers (7).
F Remove aeration detector (8).
INSTALLATION
Reverse removal procedures.
TA57153
