6-16
TM 9-2350-267-20
NEUTRAL SAFETY SWITCH: REMOVAL, lNSTALLATION AND ADJUSTMENT
REMOVAL
A Disconnect two electrical connectors (1).
B
Unscrew safety switch (2) from adapter (3) by turning counterclockwise.
C Remove pin (4).
D Unscrew adapter (3) from shift control linkage base assembly (5).
E Remove quick-release. pin (6), cotter pin (7) and straight pin (8). Disconnect
rods (9 and 10).
NOTE
Location of quick-release pin (6) is in powerpack
compartment.
F
Remove four screws (11), four lockwashers (12) and remove shift control
linkage base assembly (5) from driver’s compartment bulkhead.
G Remove pin (13), spring (14) and contact pin (15) from bell crank (16).
TA311047
