OIL FILTER BRACKET: REMOVAL AND INSTALLATIONREMOVALA Open and secure both transmission access doors.B Remove four screws (1), four flat washers (2), four lockwashers(3) and four nuts (4), securing oil filter assembly (5) to moun-ting bracket assembly (6). Discard lockwashers.C Lift oil filter assembly (5) from bracket assembly (6) and lay ontransmission.D Remove four screws (7), four lockwashers (8) and mountingbracket assembly (6) from transmission. Discard lockwashers.ESeparate mounting brackets (9 and 10) by removing twoscrews (11 ), two flat washers (12) and two self-locking nuts(13). Discard self-locking nuts.INSTALLATIONA Secure mounting bracket (9) to bracket (10) with two screws(11), two flat washers (12) and two new self-locking nuts (13).BInstall mounting bracket assembly (6) on transmission withfour screws (7) and four new lockwashers (8).cPosition oil filter assembly (5) on mounting bracket assembly(6) and secure with four screws (1), four flat washers (2), fournew lockwashers (3) and four nuts (4).D Close and secure both transmission access doors.TA3127655-5Change 1TM 9-2350-267-20
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business