Appx D
OIL SAMPLER SYSTEM: REMOVAL AND INSTALLATION
REMOVAL
A
B
C
D
E
F
G
H
I
Open and secure both transmission access doors.
Loosen two swivel nuts (1) at transmission adapter (2) and oil
sampler drain cock (3). Remove tube (4).
Remove adapter (2) and bushing (5) from transmission.
Disconnect hose (6) from elbows (7 and 8).
Remove elbow (7).
Remove screw (9), lockwasher (10) and clamp (11)
transmission and remove hose (6). Discard lockwasher.
from
Remove two screws (12), two lockwashers (13) and mounting
bracket (14). Discard lockwashers.
Remove adapter (15) from drain cock (3) and elbow (8) from
drain cock (16).
Loosen two locknuts (17) and pull drain cocks (3 and 16) from
mounting bracket (14).
TA312760
5-4.1
Change 1
TM 9-2350-267-20