FILLER NECK: REMOVAL AND INSTALLATION
Materials/Parts:
Silicone compound (item 58, Appx D)
Equipment Condition:
Filler neck assembly removed (p 4-6).
Upper fuel tank drained (p 4-2).
REMOVAL
A Remove six screws (1), six lockwashers (2) and six flat washers
(3). Discard lockwashers.
B Remove filler neck (4), gasket (5), spacer (6) and gasket (7) from
upper fuel tank (8). Discard gaskets.
INSTALLATION
NOTE
Apply silicon compound (item 58, Appx D) to
gasket surfaces before installation.
A Install new gasket (7), spacer (6), new gasket (5) and filler neck
(4) in upper fuel tank (8).
B
Install six screws (1), six new lockwashers (2) and six flat
washers (3).
TA312730 ~
4-6.1
Change 1
TM 9-2350-267-20
