STE/lCE TEST NO. 80 BATTERY CURRENT (CHARGING)

STE/ICE TEST NO. 75 BATTERY RESISTANCE CHANGE

STE/lCE TEST NO. 82 ALTERNATOR OUTPUT VOLTAGE (DC)

TM-9-2350-267-20 Carrier Ammunition Tracked M992 (2350-01-110-4660) Manual
Page Navigation
117

INITIAL SETUP STE/lCE TEST NO. 80 BATTERY CURRENT (CHARGING) References: TM 9-2350-267-10 TM 9-4910-571-12&P Equipment Condition: STE/ICE hooked up to Vehicle blocked. DCA. A B C D E F G H I J K Dial test select (1) to 80. Press test button (2) until display (3) shows CAL. Release test button. 1 If display (3) shows between ± 225, press and release test button (2). 2 f display (3) shows less than – 225 or more than + 225, refer to TM 9-4910-571-12&P. Dial test select (1) to 02. Press and release test button (2). Wait for display (3) to show PASS. Dial test select (1) to 80. Press and release test button (2). Start engine. Refer to TM 9-2350-267-10. Check display (3). Test No. 80 passes if display (3) shows 8-100 amps. Stop engine. See TM 9-2350-267-10. Return to troubleshooting. TA312673 2-48.37 Change 1 TM 9-2350-267-20

Privacy Statement
Press Release
Contact