INITIAL SETUP
STE/lCE TEST NO. 72 CURRENT FIRST PEAK
References:
TM 9-4910-571-12&P
Equipment Condition:
STE/ICE hooked up to DCA.
All electrical accessories turned off.
Vehicle blocked.
A
B
c
D
E
F
G
H
I
J
K
Dial test select (1) to 60.
Press and release test button (2). Display (3) will indicate VEH.
Dial test select (1) to 11.
Press and release test button (2). Display (3) will indicate 11.
Dial test select (1) to 72.
Press test button (2) until display (3) shows CAL. Release test
button (2).
Check display (3).
1 If display shows between ± 225, press and release test
button.
2 If display shows less than -225 or more than + 225, refer
to TM 9-4910-571-12&P.
Crank engine when display (3) reads GO.
Stop cranking engine when display (3) reads OFF.
Check display (3).
Test No. 72 passes if display shows 875-1680 amps.
Return to troubleshooting.
TA312669
2-48.33
Change 1
TM 9-2350-267-20
