14-16
Change 3
TM 9-2360-267-20
ENGINE AFES - ENGINE COMPARTMENT FIRE SENSING ELEMENTS: REMOVAL AND INSTALLATION
E
To remove sensing element (1) from 24 mounting and clip assemblies (4),
release quarter-turn fasteners (5) and open clip assembly. Remove sensing
element (1) with attached rubber bushings (6).
F
To remove 24 mounting and clip assemblies (4), remove from each: one
screw (7) and one lockwasher (8). Discard lockwashers.
INSTALLATION
CAUTION
When hand shaping sensing element for installation, do
not damage sensing element by crushing or too much
bending (allowable radius - 6 inches minimum). Ensure
1/2 inch to 3/4 inch clearance between sensing element
and personnel heater exhaust tube.
A Install 24 rubber bushings (6) spacing equally along length of sensing
element (1).
B
If removal install 24 mounting and clip assemblies (4) on 24 engine
compartment clip assembly mounts, securing each one screw (7) and one
new lockwasher (8).
C Install sensing element. Shape sensing element (1) by hand to fit in engine
compartment. Route sensing element correctly through front portion of
engine compartment.
