14-14.4
Change 4
TM 9-2350-267-20
C Ensure locking pin (5) in valve actuator (6) is installed in both engine
cylinder bottles.
REACTIVATION
A Remove locking pin (5) from valve actuator (6) of engine cylinder bottle no.
2.
B Turn MASTER switch ON.
C Move MAINTenanee switch to horizontal position. Verify successful BITE
tests. (STEP F, p 14-57 for vehicles 1 thru 344 or step F, p 14-60.2 for
vehicles 345 and shove.)
D Turn MASTER switch OFF.
E Move projectile recks to front of vehicle (TM 9-2350-267-10).
