HOSE ASSEMBLIES: REMOVAL, CLEANING, INSPECTION AND INSTALLATION (CONTINUED)
INSTALLATION
A Apply thin coat of adhesive sealant (item 5, Appx D) to inside surface of hose
(2) ends.
B
Insert coupling half (4) and adapter (3) into ends of hose (2).
C Tighten two clamps (1).
NBC POWER CONTROL BOX: REMOVAL, DISASSEMBLY AND INSTALLATION
REMOVAL
WARNING
Disconnect battery ground leads before performing
maintenance on NBC power control box.
A Remove two plugs (1 and 2) from control box (3).
B
Remove four screws (4) and four lockwashers (5). Discard lockwashers.
C
Remove control box (3).
14-9
Change 4
TM 9-2350-267-20
