CANISTER COMPARTMENT RESTRAINT BAR ASSEMBLY: DISASSEMBLY AND ASSEMBLYDISASSEMBLYThese procedures apply to both ends of right andleft rear compartment restraint bar assemblies.A Remove two fasteners (1) and restraint strap (2) from barassembly (3) by removing from each, four screws (4), fourlockwashers(5) and four flat washers (6). Discard lockwashers.B Remove two slides (7) from bar assembly (3) by removing fromeach, two screws (8) and two lockwashers (9). Discardlockwashers.ASSEMBLYA Install two slides (7) on bar assembly (3) using two screws (8)and two new lockwashers (9) for each slide.BInstall restraint strap (2) and two fasteners (1) on bar assembly(3), using four screws (4), four new lockwashers (5) and four flatwashers (6) for each fastener.TA31303111-23/(11-24 blank)Change 1TM 9-2350-267-20
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business