TM 9-2350-261-34
9. Install two hook brackets (1) on earner.
13. Remove two anchors (12) from the cables
Secure with four screws (2).
and towlines of anchor kit.
10. Install two hooks (3) on brackets (1). Secure
with two spacers (4), square nuts (5), and
wingnuts (6). Stake last two threads of
hook to retain wingnuts.
11. Install two supports (7) on carrier. Secure
with eight flat washers (8) and screws (9).
12. Install four angle brackets (10) on carrier.
Secure with eight screws (11).
Slide two anchors (12) into supports (7) and
brackets (10) on left side of carrier.
Fasten two hooks (3) to anchors (12) and
tighten wingnuts.
17-10
15.
14.
