TM 9-2350-261-34
5.
6.
7.
8.
9.
Remove 10 screws (1) from left sprocket (2)
and 10 screws from right sprocket.
N O T E
Two types of screws are provided in cap-
stan kit. One type of screw is for counter-
bore holes in sprocket. The other type of
screw is for holes without counterbore
construction. Twenty of each type of
screw is provided. Use as applicable.
Place two adapters (3) on two sprockets (2).
Secure adapters (3) to sprockets (2) with 20
screws (4). Tighten screws to 110115 lb-ft
(149156 Nm) torque. Use torque wrench.
Make sure retainer (5) is installed in drum
(6) with pin (7).
Install drum (6) on adapter (3). Secure with
retainer ( 5).
17-4