4.
5.
6.
7.
8.
Disconnect circuit 24, 23, 22, and 21 leads
(1, 2, 3, and 4) from rear main wiring
harness (5).
Disconnect connector (6) from light selector
switch.
Disconnect circuit 452A lead (7) from bilge
pump switch.
Disconnect circuit 452B lead (8) from bilge
pump ON light.
Disconnect two circuit 40 leads (9) from
instrument panel lights.
NOTE
Step 8.1 applies to M1064 only.
8.1
Disconnect circuits 28 (9.1), 30 (9.2), and
31 (9.3) from fuel tank switch (9.4).
TM 9-2350-261-34
9. Disconnect circuit 19, 520, and 614-515
leads (10, 11, and 12) from infrared
blackout (I.R. - B.O.) selector switch.
10.
11.
12.
13.
14.
15.
Disconnect circuit 15, 25A, 27F, and 14
leads (13, 14, 15, and 16) from instrument
panel wiring harness.
Disconnect circuit 516A lead (17) from
infrared (I.R.) power selector switch.
Disconnect circuit 74 and 14 plug (18) from
starter switch.
Disconnect circuit 33 lead (19) from engine
coolant temperature gage.
Disconnect circuit 406 lead (20) from air box
heater switch.
Remove front wiring harness (21) from
instrument panel.
GO TO NEXT PAGE
Change 2
6-19
