TM9-2350-261-34
Use four filter bracket
to secure transmission
transmission.
mounting screws ( 1 )
hoisting adapter to
WARNING
Hanging loads can kill or
injure you. Keep away from
hanging loads and
head
equipment.
hands away from
points. Transmission
heavy. Have helper (H) assist. Use a
device.
over-
Keep
pinch
is
lifting
22. Attach a lifting device of at least 400 lb
(182kg) capacity to transmission hoisting
adapter. Have helper (H) assist.
NOTE
Screws are different sizes. Tag or mark
screws for different sizes when removing.
Each screw has to be installed in the same
place as it was removed.
23. Remove 10 short screws (2), two long
screws (3), and washers (4). Detach
transmission and air box drain can bracket
(5) from transfer gearcase. Have helper
assist. “
INSTALL
24.
25.
26.
27.
Use four filter bracket mounting screws (1)
to secure transmission hoisting adapter to
transmission.
Attach a lifting device of at least 400 lb
( 182 kg) capacity to transmission hoisting
adapter. Have helper assist.
Position transmission on transfer gearcase.
Turn transmission drive-shaft until
transmission torque converter studs align
with transfer gearcase drive plate holes.
Have helper assist.
Apply a thin coat of antiseize compound to
cleaned threads of 12 screws (2) and (3).
NOTE
Screws are different sizes. Each screw has
to be installed in the same place as it was
removed.
28. Align transmission and air box drain can
bracket (5) with transfer gearcase. Secure
with 10 short screws (2), two long screws
(3), and washers (4). Have helper (H)
assist. Tighten each screw to 252–300 in-lb
(28–34 N.m) torque. Use torque wrench.
Loosen and retighten to 21-25 lb-ft (28-34
N.m) torque. Use torque wrench.
3-8
21.
