TM 9-2350-261-20-4
REPLACE CYLINDER DISCHARGE TUBES -- Continued
0768 00
3.
Remove tube (1) from nipple (2). Remove nipple (3) and clamp (4) from tube.
4.
Remove nut (5) and nipple (2) from driver's bulkhead.
5.
Remove tube (6) from nut (5) and nipple (7). Remove clamp (8) from tube.
6.
Remove tube (9) from nipple (7).
7.
Remove nozzle (10), and three clamps (11) from tube (9).
INSTALLATION
NOTE
If periscope power cable was removed, stow excess cable behind fire extinguisher.
1.
Place three clamps (11) on tube (9). Install nozzle (10) and nipple (7) on tube.
2.
Install nipple (2) in driver's bulkhead. Secure with nut (5).
3.
Place clamp (8) on tube (6). Install tube on two nipples (2) and (7).
4.
Place clamp (4) on tube (1). Install two nipples (2) and (3) on tube.