TM 9-2350-261-20-4
REPLACE CYLINDER DISCHARGE TUBES -- Continued
0768 00
5.
Place clamp (12) and elbow (18) on tube (13). Install tube on nipple (14) and fire extinguisher cylinder (15).
6.
Align six clamps (12) with six hull weldnuts. Secure clamps to weldnuts with six new lockwashers (16) and screws (17).
FOLLOW-THROUGH STEPS
1.
If removed, install power plant (WP 0131 00).
2.
Close power plant access door (see your -10).
3.
Raise trim vane (see your -10).
END OF TASK
0768 00-3/4 blank
