TM 9-2350-261-20-4
REPLACE FOG OIL TANK QUICK DISCONNECT TO ADAPTER ACCESS
0711 00
PLATE HOSE (M1059 ONLY) -- Continued
INSTALLATION
NOTE
Left and right hoses are replaced the same way.
1.
Remove safety cap (1) from hose (2) and dust cap (3) from quick disconnect coupling (4).
2.
Connect fog oil hose assembly (2) to fog oil tank quick disconnect coupling (4).
3.
Connect fog oil hose assembly (2) to access plate adapter (5).
4.
Secure hose assembly (2) to hull with four clamps (6), screws (7), and new lockwashers (8) (right side: secure with
five clamps, screws, and new lockwashers).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Set circuit breaker CB1 to ON. See TM 3-1040-283-10.
END OF TASK
0711 00-3/4 blank
