TM 9-2350-261-20-4
REPLACE FOG OIL TANK QUICK DISCONNECT TO ADAPTER ACCESS
0711 00
PLATE HOSE (M1059 ONLY) -- Continued
REMOVAL
WARNING
Fog oil is slippery and can cause soldiers to fall and get injured. Clean up all spillage or leakage
of fog oil as soon as possible by washing the area, or absorbing the fog oil with sand or other
absorbent material.
NOTE
Left and right hoses are replaced the same way.
1.
Disconnect fog oil hose assembly (1) from access plate adapter (2).
2.
Disconnect fog oil hose assembly (1) from fog oil tank at quick disconnect coupling (3).
3.
Install safety cap (4) on hose (1) and dust cap (5) on quick disconnect coupling (3).
4.
Remove four screws (6), lockwashers (7), clamps (8), and fog oil hose assembly (1) from carrier hull (right side: remove
five screws, lockwashers, and clamps). Discard lockwashers.
