TM 9-2350-261-20-4
REPLACE M8A3 NBC HOSES AND BRACKETS (M577A2 ONLY) -- Continued
0677 00
INSTALLATION
NOTE
Hose location may vary on air purifier.
1.
Install bracket (1), two brackets (2), six screws (3), 12 washers (4), and six new locknuts (5) on table supports (6).
2.
Install two crew hoses (7) and (8) on connectors (9) and (10).
3.
Route hose (7) over bracket (2) and under bracket (1), and install in air purifier (11). Tighten clamp (12).
4.
Route hose (8) over bracket (2) and under bracket (1), and install in air purifier (11). Tighten clamp (12).
5.
Install bracket (13), bracket (14), four screws (15), and new lockwashers (16) on forward compartment bulkhead.
6.
Install commander's station hose (17) on connector (18).
7.
Install commander's station hose (17) over and under brackets (13) and (14) and install in air purifier (11). Tighten
clamp (12).
8.
If removed, install new grommet (19) on driver's station hose (20). Route hose through frame (21).
9.
Install driver's station hose (20) on air purifier (11) and tighten clamp (12).
10. Install bracket (22), two screws (23), and new lockwashers (24) on driver's bulkhead.
11. Loop hose (20) over bracket (22) and install on connector (25).
