TM 9-2350-261-20-4
REPLACE M8A3 NBC HOSES AND BRACKETS (M577A2 ONLY) -- Continued
0677 00
REMOVAL
NOTE
Hose location may vary on air purifier.
1.
Loosen clamp (1) at air purifier (2) and remove driver's station hose (3) from connector (4), bracket (5), and air purifier.
2.
Push hose (3) with grommet (6) through frame (7). If damaged, remove grommet.
3.
Remove two screws (8), lockwashers (9), and bracket (5) from driver's bulkhead. Discard lockwashers.
4.
Loosen clamp (1) at air purifier (2), and remove commander's station hose (10) from connector (11), bracket (12),
bracket (13), and air purifier (2).
5.
Remove four screws (14), lockwashers (15), bracket (12), and bracket (13) from forward compartment bulkhead.
Discard lockwashers.
6.
Loosen clamps (1) at air purifier (2), and remove two crew hoses (16) and (17) from connectors (18) and (19), two
brackets (20), and bracket (21).
7.
Remove six screws (22), 12 washers (23), six locknuts (24), two brackets (20), and bracket (21) from table supports (25).
Discard locknuts.