TM 9-2350-261-20-4
REPLACE FLAME DETECTOR SWITCH -- Continued
0636 00
INSTALLATION
1.
Install flame detector switch (6) in heater (3). Secure with nut (7) on switch.
NOTE
Check tags on leads to make sure of proper connections.
2.
Place five leads (5) on switch (6). Secure with five screws (4).
3.
Place guard (2) on heater (3). Secure with four screws (1).
FOLLOW-THROUGH STEPS
1.
Install coolant heater and pump unit (WP 0650 00).
2.
Start heater (see your -10). Check that flame detector switch works right. Turn heater off.
END OF TASK
