TM 9-2350-261-20-4
REPLACE ELECTRONIC EQUIPMENT HEATER AIR INTAKE HOSE
AND EXHAUST PIPE (M577A2 ONLY)
THIS WORK PACKAGE COVERS:
Removal (page 0634 00-1).
Installation (page 0634 00-2).
INITIAL SETUP:
Maintenance Level
References
Unit
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0780 00, Item 29)
Engine stopped (see your -10)
Carrier blocked (see your -10)
Materials/Parts
Battery ground lead disconnected (WP 0294 00)
Adhesive (WP 0782 00, Item 4)
Gasket (2)
Personnel Required
Unit Mechanic
REMOVAL
1.
Loosen clamp (1). Remove hose (2) with hose (3) and clamp (1) from heater intake.
2.
Loosen clamp (4) on exhaust pipe (5).
3.
Remove heater from carrier (WP 0633 00).
4.
Loosen clamp (6). Remove hose (2) and clamp (6) from intake elbow (7).
5.
Loosen clamp (8). Remove exhaust pipe (5) and clamp (8) from exhaust elbow (9).
6.
Remove six screws (10), intake elbow (7), exhaust elbow (9), and two gaskets (11) from carrier top deck. Discard
gaskets.
