TM 9-2350-261-20-2
R E P L A C E T R A N S F E R G E A R C A S E L I F T I N G E Y E B O L T , C O V E R ,
A N D P L U G
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts:
Preformed packing
Personnel Required:
Unit Mechanic
References:
See your -10
See your LO
REMOVE
1.
2.
3.
Remove eyebolt (1) from transfer gearcase
(2).
Remove two screws (3) and cover (4) from
gearcase (2).
Remove plug (5) and preformed packing (6)
from bottom of gearcase (2). Discard packing.
INSPECT, CLEAN, AND REPLACE
4. Check fittings and housing for cracks and
damage. Replace as needed.
INSTALL
5. Install new preformed packing (6) and plug
(5) in gearcase (2).
6. Install cover (4) and two screws (3) in
gearcase (2).
7. Install eyebolt (1) on gearcase (2).
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Ramp lowered (see your -10)
Power plant rear access panels removed
(page 24-27 or 24-29)
Carrier blocked (see your -10)
Power plant bottom access cover removed
(page 24-32)
Suitable container placed under hull opening
to catch oil
Transfer gearcase drained into container
(see your LO)
19-6
