REPLACE TRANSMISSION TO OIL COOLER HOSE AND F I T T I N G S

C H A P T E R 18 TRANSMISSION RELATED COMPONENTS MAINTENANCE

CLEAN, INSPECT, AND REPLACE - TM-9-2350-261-20-2_421

TM-9-2350-261-20-2 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
387

TM 9-2350-261-20-2 REPLACE TRANSMISSION TO OIL COOLER HOSE AND F I T T I N G S DESCRIPTION This task covers: Remove (page 18-2). Clean, Inspect, and Replace (page 18-3). Install (page 18-3). INITIAL SETUP Tools: General Mechanics Tool Kit (Item 30, App D) Adjustable Wrench (Item 80, App D) Pipe Wrench (Item 86, App D) Materials/Parts: Dry cleaning solvent (Item 13, App C) Sealing compound (Item 51, App C) Key washer (2) Preformed packing Self-locking nut Suitable container Personnel Required: Unit Mechanic References: See your –10 See your LO Equipment Conditions: Power plant removed (page 5-11) REMOVE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Remove screw (1), key washer (2), two clamps (3), and two hoses (4 and 5) from transmission (6). Discard key washer. Remove screw (7), locknut (8), clamp (9), and two hoses (4 and 5) from bracket (10). Discard locknut. Disconnect hose (4) from elbow (11). Place hose through hull access opening. Drain oil from cooler and hose into container. Discomect hose (4) from elbow (12). Remove elbow (12) from tee (13). Disconnect circuit 327 lead (14) from trans- mission high oil temperature switch Remove switch (15) from tee (13). Remove tee (13) from bushing (16). Remove bushing (16) from oil cooler Use pipe wrench. (15). (17). Remove elbow (11) from transmission^(6). 11. Remove preformed packing (18) from elbow (11). Discard packing. 18-2

Privacy Statement
Press Release
Contact