T M12.13.14.15.16.9-2350-261-20-2Remove four screws (1), lockwashers (2), lefttail light (3), and guard (4) from outsiderear hull. Discard lockwashers.Disconnect circuits 21, 22, and 24 leads (5,6, and 7) from left tail light (3). Removenut (8) and bushing (9) from connector (10).Remove three terminals (11), insulators (12),and connectors (13) from three leads (5, 6,and 7). Discard terminals.Pull leads (5, 6, and 7) through connector(10) with bushing (9) and nut (8).Remove nut (8) and bushing (9) from leads(5. 6. and 7).17.18.19.20.21.22,Remove three screws (14), lockwashers (15),and guard (16) from three weldnuts (17).Discard lockwashers.Remove three screws (18), nuts (19), clamps(20), and rear main wiring harness (21)from guard (16).Remove two cradle clips (22) and wiringharness (23) from two cradles (24).Disconnect circuit 28 lead (25) from fuelquantity sending unit (26).Remove screw (27), clamp (28), and wiringharness (23)Remove fourharness (23)from weldnut (29).cradle clips (30) and wiringfrom four cradles (31).12-108
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business