TM 9-2350-261-20-1
R E P L A C E M U F F L E R E X T E N S I O N A N D V A L V E
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
See your -10
Materials/Parts:
Equipment Conditions:
Cotter pin
Carrier blocked (see your -10)
Key washer (4)
Engine stopped/shutdown (see your -10)
Power plant front access door open
Personnel Required:
(see your -10)
Unit Mechanic
Trim vane lowered (see your -10)
REMOVE
1.
2.
3.
W A R N I N G
Hot exhaust pipes can bum
you. Let power unit cool
before you start work.
Remove four screws (1) and key washers (2).
Lift out exhaust extension (3) from adapter
plate (4). Discard washers.
Remove four screws (5) and adapter plate (4)
from exhaust grill (6).
Remove cotter pin (7), pin (8), and valve (9)
INSTALL
4.
5.
6.
7.
Install valve (9) on exhaust extension (3). Se-
cure with pin (8) and new cotter pin (7).
Install adapter plate (4) on exhaust grill (6).
Secure with four screws (5).
Install exhaust extension (3) through adapter
plate (4) on muffler inside carrier.
Secure exhaust extension (3) to adapter plate
(4) and grill (5) with four new key
washers (2) and screws (1).
from exhaust extension-(3). Discard cotter
7-18
