INSTALL
.
49.
50.
51.
Secure bands (1) with two decals (2) to hull
with two brackets (3), four new key washers
(4), and screws (5). Tighten screws to
40-45 lb-ft (54-61 Nm) torque. Use torque
wrench (Item 97).
Secure bands (6) to hull with four spacers
(7), two anchor straps (8), four new key
washers (9), and screws (10). Tighten
screws to 168-204 Ib-in (19-23 Nm)
torque. Use torque wrench (Item 95) and
rocket wrench set.
Position wiring harness (11) to clear fuel
tank installation area (12). Install fuel tank
in carrier.
52.
53.
54.
55.
56.
TM 9-2350-261-20-1
Install thumbscrew (13) and wingnut (14) in
hull top.
Install litter kit mount pin (15) and new
lockwasher (16) in hull top.
Connect fuel supply hose (17) to
adapter (18).
Connect fuel return hose (19) to
adapter (20).
Connect heater fuel supply hose (21) to
shutoff valve (22) (when personnel heater is
installed).
GO TO NEXT PAGE
6-17