TM 9-2350-261-20-16.7.8.9.Remove two clips (1), harness (2), screws (3),and cradles (4) from front end of fueltank (5).Remove screw (6), two washers (7), clamp(8), condenser (9), and two ground leads (10and 11), from harness (2) and fuel tank (5).Remove two screws (12), flat washers (13),key washers (14), and bracket (15) from hullat front end of fuel tank (5). Discard keywashers.Remove cotter pin (16), headed pin (17),washer (18), and restraint plate (19) frombracket (15). Discard cotter pin.10.11.12.13.14.15.Remove two screws (20), five lockwashers(21), fuel tank guard (22), and ground lead(23) from fuel tank (5). Discardlockwashers.Disconnect fuel supplyadapter (25).Disconnect fuel returnadapter (27).Disconnect heater fuelfuel shutoff valve (29)er is installed).hose (24) fromhose (26) fromsupply hose (28) from(when personnel heat-Remove litter kit mount pin (30) andlockwasher (31) from hull top. Discardlockwasher.Remove thumbscrew (32) and wing nut (33)from hull top.6-12
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business