TM 9-2350-261-20-1
28.
29.
Position matched set of drive belts (1) on
pulleys (2 and 3) and idler pulleys
(4 and 5).
Turn adjusting nut (6) on rod end (7) to left
or right until lower end is within operating
range shown on
locknut (8) .
adjusting sleeve. Tighten
30.
5-8
Position hose (9) on elbow (10) and tighten
two clamps (11).
31. Position hose (12) on tube (13) and tighten
two clamps (14).
32.
33.
Secure two hoses (15) to auxiliary tank (16)
with two clamps (17).
Position hose (18) on auxiliary tank (16)
and tighten two clamps (19).
