TM 9-2350-261-20-1
1.
2.
3.
4.
Turn dome lights on using rear dome light switch.
Remove circuit 38 plug (1) from front dome light switch
jack (2).
Measure voltage between circuit 38 plug (1) and
ground.
Does multimeter read 17 volts or more?
1. Turn MASTER SWITCH to OFF.
2. Remove jumper wire from circuit 10 and 38 plugs.
3. Replace front dome light switch (page 12-68).
4. Verify no faults found.
1. Turn MASTER SWITCH to
OFF.
2. Repair wiring harness
circuit 38 (page 14-3).
3. Install master switch panel
on distribution box.
4. Verify no faults found.
Change 3
3-120.1
