TM 9-2350-261-20-1
1. Measure voltage between starter ground (1) and
carrier ground with engine cranking for 3 to 5
seconds.
2. Does multimeter read less than 1/2 volt?
1. Replace starter (page 10-2).
2. Verify no faults found.
1. Replace/repair starter
ground as necessary
(page 10-4).
2. Verify no faults found.
1. Turn MASTER SWITCH to OFF.
2. Clean, Inspect, and Repair earner batteries
(page 13-13 or 13-16).
3. Turn MASTER SWITCH to ON.
4. Measure voltage between positive (+) terminal (3)
and negative (-) terminal (4) with engine cranking
for 3 to 5 seconds..
5. Does multimeter read more than 19 volts?
1. Verify no faults found.
3-26
PAGE 3-29
