TM 9-2350-247-34
INSTALL TURN SIGNAL KIT Continued
0076 00
24. Thread circuit 461 lead (1) of wiring harness (2) through stuffing tube (3) and through one hole of new gasket (4).
25. Install shell (5), sleeve (6), and terminal (7) on end of circuit 461 lead (1). Slide sleeve and shell over terminal.
26. One at a time, remove terminals (7), sleeves (6), shells (5), and marker bands (8) from ends of circuit 20, 514, and 515
leads (9) of main wiring harness (10). Pull leads from gasket (4). Reinstall shells, sleeves, and marker bands on leads.
Discard three terminals and one gasket.
27. Install three terminals (7) on ends of circuit 20, 514, and 515 leads (9). Slide sleeves (6) and shells (5) over terminals of
main wiring harness (10).
28. Slide gasket (4) into stuffing tube (3). Install nut (11).
29. Connect circuit 514 and 515 leads (9) to left infrared headlight (see your -20)
0076 00-13