TM 9-2350-247-34
INSTALL TURN SIGNAL KIT Continued
0076 00
INSTALL
NOTE
Leave all electrical leads connected.
1.
Partially remove instrument panel (see your -20).
2.
Place new gasket (1) and bar (2) inside of hull. Secure from outside with two screws (3) and new lock washers (4).
3.
Place flasher (5) on bar (2) with three new lock washers (6) and two screws (7). Install one washer on each side of
harness ground lead (8).
4.
Install flasher wiring harness (9) on flasher (5).
0076 00-8