TM 9-2350-247-34
REPAIR ENGINE AND TRANSMISSION STAND (M548A3) Continued
0054 00
4.
Place beam assembly (2) on workbench.
5.
Remove retaining ring (6) securing bearing (7).
6.
Push bearing (7) out of beam assembly (2).
7.
Install new bearing (7).
8.
Install retaining ring (6) on beam assembly (2).
9.
Install beam assembly (2) on main frame (3) and install headless pin (5). Install new cotter pin (4).
10. Tighten jam nuts (1).
0054 00-12