TM 9-2350-247-34
REPAIR ENGINE AND TRANSMISSION STAND (M548A3) — Continued
0054 00
NOTE
If hand wheel or tube requires replacement, go to Step 4, if not, go to next note.
4.
Remove handle (1) from hand wheel (2).
5.
Drive out pin (3) from hand wheel (2). Discard pin.
6.
Install hand wheel (2) on tube (4). Align dowel holes and install new pin (3).
NOTE
If hand wheel bushing requires replacement, go to Step 7. If not, go to Step 11.
7.
Remove screw (5) and lock nut (6) securing bracket (7) to engine support (8). Remove bracket. Discard lock nut.
0054 00-7
