TM 9-2350-247-34
REPAIR ENGINE AND TRANSMISSION STAND (M548A3) Continued
0054 00
5.
Remove screw (1) and lock nut (2) securing axle (3) to support (4). Remove axle. Discard lock nut.
6.
Install axle (3), screw (1), and new lock nut (2).
7.
Install washer (5), vee wheel (6), washer (5), and new cotter pin (7).
8.
Lubricate vee wheel (6). Use automotive grease.
9.
Raise support (4), remove 2 x 4 (8), and lower wheels onto track.
10. Install two screws (9) and new lock nuts (10) securing jack screw (11) to main frame (12).
0054 00-5