TM 9-2350-247-34
REPAIR FAN ASSEMBLY (M548A3) Continued
0015 00
ASSEMBLY
1.
Install gearbox (1) on support (2). Secure with four screws (3), eight washers (4), and four nuts (5).
2.
Install key (6) and fan (7) on shaft (8) on gearbox (1). Secure with new washer (9) and nut (10).
3.
To seat fan on gearbox, tighten nut (10) to 70-75 lb-ft (95-102 Nm) torque. Then remove nut (10) and washer (9).
4.
Apply sealing compound to both sides of washer (9).
0015 00-3